Can you build a firmware which can replicate the gate module firmware on SONOFF SV?
Thank you in Advance.
SONOFF
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
You can build by yourself using ESP8266 - IOT SDK
https://www.supla.org/pl/download
https://www.supla.org/pl/download
-
- Posts: 1511
- Joined: Sun Jun 26, 2016 4:24 pm
Or ... You can upload and test this software:
https://github.com/zchmielak/ESP8266/bl ... 2.0_p5.rar
https://github.com/zchmielak/ESP8266/bl ... 2.0_p5.rar
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
When I build sonoff firmware from SDK sonoff doesn't boots up. I tried the same firmware on Nodemcu with no luck. I even tried with cfg with pullup but it didn't solved the issue. Am I missing anything?
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
What do you see on the console ?
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
You can use putty.
Speed rate 74880
Speed rate 74880
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
This is what I got when I reset the nodemcu.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
Use esp_init_data_default.bin
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
Erase all flash and use esp_init_data_default.bin