thermostat with Oled display

[Michal81]

elamya You are amazing ! Been working great since yesterday Thank You very much !!!

Potwierdzam - ten człowiek - elmaya jest NIESAMOWITY.

[MICHAŁ DOM]

Wszystko pięknie. Fajnie by było by od tego układu wyrzucić przekaźnik ( stacja np. w pokoju ) a moduł wykonawczy z wemosem i przekaźnikiem przy piecu. Wtedy będzie git

Witam
czy rozwijałeś ten pomysł aby przekaźniki na kolejnym wemosem zainstalować w innym pomieszczeniu ??
szukam wsparcia przy realizacji sterowania ogrzewaniem

[gigilio]

Hi Elmaya,
I have question - i want to connect buzzer instead relay.
It wants an alarm to go off if the temperature is too low or too high.
Is it possible on your thermostat ?

[MICHAŁ DOM]

My visualization of this thermostat,
Cover after the old Sonoff Touch (which doesn't work anyway )
Original glass will be replaced with engraving laminate. It promises to be beautiful

hello did you manage to design the thermostat ????

[michael]

It is true that I abandoned construction, otherwise I had solved it at home, but it was close to implementation

[YoMan]

It is true that I abandoned construction, otherwise I had solved it at home, but it was close to implementation

I'm going to make a working thermostat as well but in other way (glass front panel) but I stucked on projecting pcb working on progress ...
How is Your project? Is working properly? I'm curious

[YoMan]

Hi @elmaya

Great respect for the soft

I've got question about setting the temperature. Now it is working like seting + and - so if I want to lower the temperature for night by 1,5 grads I need to make timetable that is lowering 3x 0,5 grad. If something go bad and one order will not go through the net then the next day the tempertature will be lower/higher by 0,5C.
Is it possible to change the soft to make just order setting certain value for thermostat? For example 21 grades? Similar like it is with dimmable LED, it is possible to set % of light so I guess Supla supports states with value. Or am I tottaly wrong?

[sllawek66@wp.pl]

Hello
Elmaya, will it work on the ds 18b20 in this thermostat ?.

Sorry i don't know english ds18b20 parasitically.

[YoMan]

Hello
Elmaya, will it work on the ds 18b20 in this thermostat ?.

Sorry i don't know english ds18b20 parasitically.

https://en-forum.supla.org/viewtopic.php?f=10&t=5320

Screenshot_2020-11-21 (1) thermostat with Oled display - supla org.png

[sllawek66@wp.pl]

I only have two wires for the sensor, I want to power with two wires parasitically if this soft will do the trick