Wsparcie GUI-Generic dla ESP32

krycha88
Posty: 5187
Rejestracja: pt lis 16, 2018 7:25 am
Kontakt:

esp32.PNG
esp32.PNG (41.13 KiB) Przejrzano 6624 razy
Oficjalnie GUI-Generic wspiera ESP32 :) Dodatkowe 38 wolnych pinów oraz 520 KB pamięci robi robotę. Wszystkie funkcje dostępne dla ESP2866 powinny działać - zapraszam do testów.

Builder-online nie wspiera tej płytki ale ze względu na ilość wolnej pamięci nie jest to aż tak bardzo konieczne - ale fajni by było ;)
Załączniki
GUI_Generic_ESP32.zip
(726.06 KiB) Pobrany 442 razy
https://gui-generic-builder.supla.io/
Awatar użytkownika
Robert Błaszczak
Posty: 3970
Rejestracja: sob gru 22, 2018 8:55 pm
Lokalizacja: Zielona Góra
Kontakt:

Super i dzięki za kawal dobrej roboty.
Pozdrawiam
Robert Błaszczak


Moja prywatna strona: www.blaszczak.pl
Awatar użytkownika
Goral64
Posty: 3131
Rejestracja: pt gru 27, 2019 6:22 pm
Lokalizacja: Żerniki Wrocławskie
Kontakt:

krycha88 pisze: pn sie 30, 2021 12:33 pm esp32.PNG

Oficjalnie GUI-Generic wspiera ESP32 :) Dodatkowe 38 wolnych pinów oraz 520 KB pamięci robi robotę. Wszystkie funkcje dostępne dla ESP2866 powinny działać - zapraszam do testów.

Builder-online nie wspiera tej płytki ale ze względu na ilość wolnej pamięci nie jest to aż tak bardzo konieczne - ale fajni by było ;)
Zrobię wsparcie, tylko muszę ogarnąć co z mojej strony jest do zrobienia.
Widzimy się na Supla Offline Party Season 2 :D

Obrazek
Awatar użytkownika
uchnast.michal
Posty: 1074
Rejestracja: wt cze 04, 2019 11:37 am

Mój sonoff dual r3 już miał depresję. W jego imieniu bardzo dziękuję:)
e-talking............
Byłem tam - Supla Offline Party 2023
Awatar użytkownika
Goral64
Posty: 3131
Rejestracja: pt gru 27, 2019 6:22 pm
Lokalizacja: Żerniki Wrocławskie
Kontakt:

@krycha88 w pliku README.txt masz babola

Kod: Zaznacz cały

FLASH SIZE 16Mbit(4MByte)
powinno być

Kod: Zaznacz cały

FLASH SIZE 32Mbit(4MByte)
Widzimy się na Supla Offline Party Season 2 :D

Obrazek
Awatar użytkownika
Goral64
Posty: 3131
Rejestracja: pt gru 27, 2019 6:22 pm
Lokalizacja: Żerniki Wrocławskie
Kontakt:

Przy okazji, ktoś już wgrywał binarkę od krycha88 do ESP32?
Działa?
U mnie niestety na ESP-WROOM-32 mam tylko na serialu

Kod: Zaznacz cały

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371 
ets Jun  8 2016 00:22:57
Widzimy się na Supla Offline Party Season 2 :D

Obrazek
krycha88
Posty: 5187
Rejestracja: pt lis 16, 2018 7:25 am
Kontakt:

Aby zaprogramować ESP32 trzeba niestety wgrać dodatkowe pliki na odpowiednie adresy:
boot_app0.bin
bootloader_dout_40m.bin
partitions.bin

o których nie wiedziałem :) Komplikuje to trochę proces fleshowania.
https://gui-generic-builder.supla.io/
krycha88
Posty: 5187
Rejestracja: pt lis 16, 2018 7:25 am
Kontakt:

Po krótkich poszukiwaniach chłopaki z Tasmota już zrobili automat który wgrywa odpowiednie pliki pod adresy:
https://github.com/Jason2866/ESP_Flasher

Więc wystarczy wgrać ten plik który wygenerowałem oczywiście readme jest zupełnie błędne.
https://gui-generic-builder.supla.io/
Maniek913
Posty: 491
Rejestracja: czw lut 22, 2018 9:46 pm

Załadowałem ten soft - na razie niewiele mogę powiedzieć bo są duże trudności z łącznością - jak już się połączy to co chwila rozłącza się - tak to wygląda:

Kod: Zaznacz cały

*▒P▒V▒▒ET▒Q▒UU▒T▒▒-▒QR▒▒▒T▒▒▒RUJ▒▒V▒Z▒▒(▒T▒J▒R▒J▒uR5T▒T▒▒U▒▒▒-QBU▒▒j▒▒▒▒T▒T▒Z▒Q▒WխQ(▒uT▒Z▒QJ-]▒Z▒,QR▒R▒Z▒QڬR▒Z▒QQTVUZ▒▒B)▒▒▒▒խ%▒(Ք▒▒(▒▒UVK%▒(Ք▒▒(▒J▒jZ▒*UE▒(ՔTQ▒QR▒▒▒▒▒▒▒T▒,EQE▒▒jZʕ▒▒Z▒P▒E▒Q▒XQ▒Config read
Key: 0 Value: ▒'ϋ▒*▒▒Ѣ▒&▒▒▒▒
Key: 1 Value: {|▒s▒▒▒Q{▒6u▒▒c
Key: 2 Value: WiFi
Key: 3 Value: haslo
Key: 4 Value: admin
Key: 5 Value: pass
Key: 6 Value: ESP32
Key: 7 Value: svr9.supla.org
Key: 8 Value: mail@o2.pl
Key: 9 Value: 1
Key: 10 Value: 1
Key: 11 Value: 0
Key: 12 Value: 1
Key: 13 Value: 1
Key: 14 Value: 1
Key: 15 Value: 0
Key: 16 Value: 0
Key: 17 Value: 10
Key: 18 Value: 0
Key: 19 Value:
Key: 20 Value: 0
Key: 21 Value: 1
Key: 22 Value:
Key: 23 Value:
Key: 24 Value: 1,2,,1,,2,2,1,,,,,,,,,1,,,,,,,,,,,,,
Key: 25 Value:
Key: 26 Value:
Key: 27 Value:
Key: 28 Value: 0,0,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 29 Value:
Key: 30 Value:
Key: 31 Value:
Key: 32 Value:
Key: 33 Value:
Key: 34 Value:
Key: 35 Value:
Key: 36 Value: 1,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value:
Key: 38 Value:
Key: 39 Value:
Key: 40 Value:
Key: 41 Value:
Key: 42 Value:
Key: 43 Value:
Key: 44 Value:
Key: 45 Value:
Key: 46 Value:
Key: 47 Value:
Key: 48 Value:
Key: 49 Value:
Key: 50 Value:
Key: 51 Value:
Key: 52 Value:
Key: 53 Value:
Key: 54 Value:
Key: 55 Value:
Key: 56 Value:
Key: 57 Value: 1,4,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 58 Value:
Key: 59 Value:
Key: 60 Value:
Key: 61 Value:
Key: 62 Value:
Key: 63 Value:
Key: 64 Value:
Key: 65 Value: 5
Key: 66 Value: 5
Key: 67 Value: 0
Key: 68 Value:
Key: 69 Value: 0
Key: 70 Value: 0
Key: 71 Value:
Key: 72 Value:
Key: 73 Value:
Key: 74 Value:
Key: 75 Value:
Key: 76 Value:
Key: 77 Value:
Key: 78 Value:
Key: 79 Value:
Key: 80 Value:
Key: 81 Value: 1
Key: 82 Value: 1
Key: 83 Value: 20
Key: 84 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 5 0 0 0 0 0 ]
Section type: 3; size: 5
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
readStorage: 4; Read: [0 0 0 0 ]
Relay[0]: restored durationMs: 0
readStorage: 1; Read: [1 ]
Relay[0]: restored relay state: ON
 **** Digital write[0], pin: 12; value: 0
Channel(0) value changed to 1
Initializing network layer
WiFi: establishing connection with SSID: "WiFi"
Using Supla protocol version 12
Current status: [5] SuplaDevice initialized
Current status: [8] No connection to network
local IP: 192.168.0.108
subnetMask: 255.255.255.0
gatewayIP: 192.168.0.1
Signal Strength (RSSI): -72 dBm
Establishing Secured connection with: svr9.supla.org (port: 2016)
Connected to Supla Server
Current status: [10] Register in progress
Device registered (activity timeout 120 s, server version: 16, server min version: 1)
Current status: [17] Registered and ready
Changing activity timeout to 30
Activity timeout set to 30 s
[E][WebServer.cpp:633] _handleRequest(): request handler not found
*▒P▒V▒▒ET▒Q▒UU▒T▒▒-▒QRQUꢪ▒U▒J▒▒▒u▒▒\▒(▒T▒J▒R▒J▒u▒uT▒T▒▒U▒▒▒-QBU▒▒j▒▒EJ▒R▒Zq▒▒R▒Zq▒uT▒Zq▒▒▒R▒Zq▒▒WխQ(▒▒▒խQ(Eե▒I▒▒▒T▒U▒UZUEu▒▒▒▒(▒▒UVKEu▒▒▒▒(▒J▒jZ▒*UEu▒▒TQ▒QR▒▒▒▒▒▒▒T▒\EQE▒▒jZ▒UEj▒▒Pq*QQXQ▒Config read
Key: 0 Value: ▒'ϋ▒*▒▒Ѣ▒&▒▒▒▒
Key: 1 Value: {|▒s▒▒▒Q{▒6u▒▒c
Key: 2 Value: WiFi
Key: 3 Value: haslo
Key: 4 Value: admin
Key: 5 Value: pass
Key: 6 Value: ESP32
Key: 7 Value: svr9.supla.org
Key: 8 Value: mail@o2.pl
Key: 9 Value: 1
Key: 10 Value: 1
Key: 11 Value: 0
Key: 12 Value: 1
Key: 13 Value: 1
Key: 14 Value: 1
Key: 15 Value: 0
Key: 16 Value: 0
Key: 17 Value: 10
Key: 18 Value: 0
Key: 19 Value:
Key: 20 Value: 0
Key: 21 Value: 1
Key: 22 Value:
Key: 23 Value:
Key: 24 Value: 1,2,,1,,2,2,1,,,,,,,,,1,,,,,,,,,,,,,
Key: 25 Value:
Key: 26 Value:
Key: 27 Value:
Key: 28 Value: 0,0,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 29 Value:
Key: 30 Value:
Key: 31 Value:
Key: 32 Value:
Key: 33 Value:
Key: 34 Value:
Key: 35 Value:
Key: 36 Value: 1,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value:
Key: 38 Value:
Key: 39 Value:
Key: 40 Value:
Key: 41 Value:
Key: 42 Value:
Key: 43 Value:
Key: 44 Value:
Key: 45 Value:
Key: 46 Value:
Key: 47 Value:
Key: 48 Value:
Key: 49 Value:
Key: 50 Value:
Key: 51 Value:
Key: 52 Value:
Key: 53 Value:
Key: 54 Value:
Key: 55 Value:
Key: 56 Value:
Key: 57 Value: 1,4,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 58 Value:
Key: 59 Value:
Key: 60 Value:
Key: 61 Value:
Key: 62 Value:
Key: 63 Value:
Key: 64 Value:
Key: 65 Value: 5
Key: 66 Value: 5
Key: 67 Value: 0
Key: 68 Value:
Key: 69 Value: 0
Key: 70 Value: 0
Key: 71 Value:
Key: 72 Value:
Key: 73 Value:
Key: 74 Value:
Key: 75 Value:
Key: 76 Value:
Key: 77 Value:
Key: 78 Value:
Key: 79 Value:
Key: 80 Value:
Key: 81 Value: 1
Key: 82 Value: 1
Key: 83 Value: 20
Key: 84 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 5 0 0 0 0 0 ]
Section type: 3; size: 5
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
readStorage: 4; Read: [0 0 0 0 ]
Relay[0]: restored durationMs: 0
readStorage: 1; Read: [1 ]
Relay[0]: restored relay state: ON
 **** Digital write[0], pin: 12; value: 0
Channel(0) value changed to 1
Initializing network layer
WiFi: establishing connection with SSID: "WiFi"
Using Supla protocol version 12
Current status: [5] SuplaDevice initialized
Current status: [8] No connection to network
local IP: 192.168.0.108
subnetMask: 255.255.255.0
gatewayIP: 192.168.0.1
Signal Strength (RSSI): -70 dBm
Establishing Secured connection with: svr9.supla.org (port: 2016)
Connected to Supla Server
Current status: [10] Register in progress
[E][WebServer.cpp:633] _handleRequest(): request handler not found
*▒P▒V▒▒ET▒Q▒UU▒T▒▒-▒QRQUꢪ▒U▒J▒▒▒u▒▒\▒(▒T▒J▒R▒J▒u▒uT▒T▒▒U▒▒▒-QBU▒▒j▒▒EJ▒R▒Zq▒▒R▒Zq▒uT▒Zq▒▒▒R▒Zq▒▒WխQ(▒▒▒խQ(Eե▒I▒▒▒T▒U▒UZUEu▒▒▒▒(▒▒UVKEu▒▒▒▒(▒J▒jZ▒*UEu▒▒TQ▒QR▒▒▒▒▒▒▒T▒\EQE▒▒jZ▒UEj▒▒Pq*QQXQ▒Config read
Key: 0 Value: ▒'ϋ▒*▒▒Ѣ▒&▒▒▒▒
Key: 1 Value: {|▒s▒▒▒Q{▒6u▒▒c
Key: 2 Value: WiFi
Key: 3 Value: haslo
Key: 4 Value: admin
Key: 5 Value: pass
Key: 6 Value: ESP32
Key: 7 Value: svr9.supla.org
Key: 8 Value: mail@o2.pl
Key: 9 Value: 1
Key: 10 Value: 1
Key: 11 Value: 0
Key: 12 Value: 1
Key: 13 Value: 1
Key: 14 Value: 1
Key: 15 Value: 0
Key: 16 Value: 0
Key: 17 Value: 10
Key: 18 Value: 0
Key: 19 Value:
Key: 20 Value: 0
Key: 21 Value: 1
Key: 22 Value:
Key: 23 Value:
Key: 24 Value: 1,2,,1,,2,2,1,,,,,,,,,1,,,,,,,,,,,,,
Key: 25 Value:
Key: 26 Value:
Key: 27 Value:
Key: 28 Value: 0,0,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 29 Value:
Key: 30 Value:
Key: 31 Value:
Key: 32 Value:
Key: 33 Value:
Key: 34 Value:
Key: 35 Value:
Key: 36 Value: 1,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value:
Key: 38 Value:
Key: 39 Value:
Key: 40 Value:
Key: 41 Value:
Key: 42 Value:
Key: 43 Value:
Key: 44 Value:
Key: 45 Value:
Key: 46 Value:
Key: 47 Value:
Key: 48 Value:
Key: 49 Value:
Key: 50 Value:
Key: 51 Value:
Key: 52 Value:
Key: 53 Value:
Key: 54 Value:
Key: 55 Value:
Key: 56 Value:
Key: 57 Value: 1,4,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 58 Value:
Key: 59 Value:
Key: 60 Value:
Key: 61 Value:
Key: 62 Value:
Key: 63 Value:
Key: 64 Value:
Key: 65 Value: 5
Key: 66 Value: 5
Key: 67 Value: 0
Key: 68 Value:
Key: 69 Value: 0
Key: 70 Value: 0
Key: 71 Value:
Key: 72 Value:
Key: 73 Value:
Key: 74 Value:
Key: 75 Value:
Key: 76 Value:
Key: 77 Value:
Key: 78 Value:
Key: 79 Value:
Key: 80 Value:
Key: 81 Value: 1
Key: 82 Value: 1
Key: 83 Value: 20
Key: 84 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 5 0 0 0 0 0 ]
Section type: 3; size: 5
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
readStorage: 4; Read: [0 0 0 0 ]
Relay[0]: restored durationMs: 0
readStorage: 1; Read: [1 ]
Relay[0]: restored relay state: ON
 **** Digital write[0], pin: 12; value: 0
Channel(0) value changed to 1
Initializing network layer
WiFi: establishing connection with SSID: "WiFi"
Using Supla protocol version 12
Current status: [5] SuplaDevice initialized
Current status: [8] No connection to network
local IP: 192.168.0.108
subnetMask: 255.255.255.0
gatewayIP: 192.168.0.1
Signal Strength (RSSI): -71 dBm
Establishing Secured connection with: svr9.supla.org (port: 2016)
Connected to Supla Server
Current status: [10] Register in progress
Device registered (activity timeout 120 s, server version: 16, server min version: 1)
Current status: [17] Registered and ready
Changing activity timeout to 30
Activity timeout set to 30 s
[E][WebServer.cpp:633] _handleRequest(): request handler not found
*▒P▒V▒▒ET▒Q▒UU▒T▒▒-▒QRQUꢪ▒U▒J▒▒▒u▒▒\▒(▒T▒J▒R▒J▒u▒uT▒T▒▒U▒▒▒-QBU▒▒j▒▒EJ▒R▒Zq▒▒R▒Zq▒uT▒Zq▒▒▒R▒Zq▒▒WխQ(▒▒▒խQ(Eե▒I▒▒▒T▒U▒UZUEu▒▒▒▒(▒▒UVKEu▒▒▒▒(▒J▒jZ▒*UEu▒▒TQ▒QR▒▒▒▒▒▒▒T▒\EQE▒▒jZ▒UEj▒▒Pq*QQXQ▒Config read
Key: 0 Value: ▒'ϋ▒*▒▒Ѣ▒&▒▒▒▒
Key: 1 Value: {|▒s▒▒▒Q{▒6u▒▒c
Key: 2 Value: WiFi
Key: 3 Value: haslo
Key: 4 Value: admin
Key: 5 Value: pass
Key: 6 Value: ESP32
Key: 7 Value: svr9.supla.org
Key: 8 Value: mail@o2.pl
Key: 9 Value: 1
Key: 10 Value: 1
Key: 11 Value: 0
Key: 12 Value: 1
Key: 13 Value: 1
Key: 14 Value: 1
Key: 15 Value: 0
Key: 16 Value: 0
Key: 17 Value: 10
Key: 18 Value: 0
Key: 19 Value:
Key: 20 Value: 0
Key: 21 Value: 1
Key: 22 Value:
Key: 23 Value:
Key: 24 Value: 1,2,,1,,2,2,1,,,,,,,,,1,,,,,,,,,,,,,
Key: 25 Value:
Key: 26 Value:
Key: 27 Value:
Key: 28 Value: 0,0,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 29 Value:
Key: 30 Value:
Key: 31 Value:
Key: 32 Value:
Key: 33 Value:
Key: 34 Value:
Key: 35 Value:
Key: 36 Value: 1,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value:
Key: 38 Value:
Key: 39 Value:
Key: 40 Value:
Key: 41 Value:
Key: 42 Value:
Key: 43 Value:
Key: 44 Value:
Key: 45 Value:
Key: 46 Value:
Key: 47 Value:
Key: 48 Value:
Key: 49 Value:
Key: 50 Value:
Key: 51 Value:
Key: 52 Value:
Key: 53 Value:
Key: 54 Value:
Key: 55 Value:
Key: 56 Value:
Key: 57 Value: 1,4,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 58 Value:
Key: 59 Value:
Key: 60 Value:
Key: 61 Value:
Key: 62 Value:
Key: 63 Value:
Key: 64 Value:
Key: 65 Value: 5
Key: 66 Value: 5
Key: 67 Value: 0
Key: 68 Value:
Key: 69 Value: 0
Key: 70 Value: 0
Key: 71 Value:
Key: 72 Value:
Key: 73 Value:
Key: 74 Value:
Key: 75 Value:
Key: 76 Value:
Key: 77 Value:
Key: 78 Value:
Key: 79 Value:
Key: 80 Value:
Key: 81 Value: 1
Key: 82 Value: 1
Key: 83 Value: 20
Key: 84 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 5 0 0 0 0 0 ]
Section type: 3; size: 5
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
readStorage: 4; Read: [0 0 0 0 ]
Relay[0]: restored durationMs: 0
readStorage: 1; Read: [1 ]
Relay[0]: restored relay state: ON
 **** Digital write[0], pin: 12; value: 0
Channel(0) value changed to 1
Initializing network layer
WiFi: establishing connection with SSID: "WiFi"
Using Supla protocol version 12
Current status: [5] SuplaDevice initialized
Current status: [8] No connection to network
local IP: 192.168.0.108
subnetMask: 255.255.255.0
gatewayIP: 192.168.0.1
Signal Strength (RSSI): -68 dBm
Establishing Secured connection with: svr9.supla.org (port: 2016)
Connected to Supla Server
Current status: [10] Register in progress
[E][WebServer.cpp:633] _handleRequest(): request handler not found
*▒P▒V▒▒ET▒Q▒UU▒T▒▒-▒QRQUꢪ▒U▒J▒▒▒u▒▒\▒(▒T▒J▒R▒J▒u▒uT▒T▒▒U▒▒▒-QBU▒▒j▒▒EJ▒R▒Zq▒▒R▒Zq▒uT▒Zq▒▒▒R▒Zq▒▒WխQ(▒▒▒խQ(Eե▒I▒▒▒T▒U▒UZUEu▒▒▒▒(▒▒UVKEu▒▒▒▒(▒J▒jZ▒*UEu▒▒TQ▒QR▒▒▒▒▒▒▒T▒\EQE▒▒jZ▒UEj▒▒Pq*QQXQ▒Config read
Key: 0 Value: ▒'ϋ▒*▒▒Ѣ▒&▒▒▒▒
Key: 1 Value: {|▒s▒▒▒Q{▒6u▒▒c
Key: 2 Value: WiFi
Key: 3 Value: haslo
Key: 4 Value: admin
Key: 5 Value: pass
Key: 6 Value: ESP32
Key: 7 Value: svr9.supla.org
Key: 8 Value: mail@o2.pl
Key: 9 Value: 1
Key: 10 Value: 1
Key: 11 Value: 0
Key: 12 Value: 1
Key: 13 Value: 1
Key: 14 Value: 1
Key: 15 Value: 0
Key: 16 Value: 0
Key: 17 Value: 10
Key: 18 Value: 0
Key: 19 Value:
Key: 20 Value: 0
Key: 21 Value: 1
Key: 22 Value:
Key: 23 Value:
Key: 24 Value: 1,2,,1,,2,2,1,,,,,,,,,1,,,,,,,,,,,,,
Key: 25 Value:
Key: 26 Value:
Key: 27 Value:
Key: 28 Value: 0,0,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 29 Value:
Key: 30 Value:
Key: 31 Value:
Key: 32 Value:
Key: 33 Value:
Key: 34 Value:
Key: 35 Value:
Key: 36 Value: 1,1,0,,2,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 37 Value:
Key: 38 Value:
Key: 39 Value:
Key: 40 Value:
Key: 41 Value:
Key: 42 Value:
Key: 43 Value:
Key: 44 Value:
Key: 45 Value:
Key: 46 Value:
Key: 47 Value:
Key: 48 Value:
Key: 49 Value:
Key: 50 Value:
Key: 51 Value:
Key: 52 Value:
Key: 53 Value:
Key: 54 Value:
Key: 55 Value:
Key: 56 Value:
Key: 57 Value: 1,4,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
Key: 58 Value:
Key: 59 Value:
Key: 60 Value:
Key: 61 Value:
Key: 62 Value:
Key: 63 Value:
Key: 64 Value:
Key: 65 Value: 5
Key: 66 Value: 5
Key: 67 Value: 0
Key: 68 Value:
Key: 69 Value: 0
Key: 70 Value: 0
Key: 71 Value:
Key: 72 Value:
Key: 73 Value:
Key: 74 Value:
Key: 75 Value:
Key: 76 Value:
Key: 77 Value:
Key: 78 Value:
Key: 79 Value:
Key: 80 Value:
Key: 81 Value: 1
Key: 82 Value: 1
Key: 83 Value: 20
Key: 84 Value: 0
Supla - starting initialization
Storage initialization
readStorage: 8; Read: [53 55 50 4C 41 1 0 1 ]
Storage: Number of sections 1
Reading section: 0
readStorage: 7; Read: [3 5 0 0 0 0 0 ]
Section type: 3; size: 5
Validating storage state section with current device configuration
Storage state section validation completed. Loading elements state...
readStorage: 4; Read: [0 0 0 0 ]
Relay[0]: restored durationMs: 0
readStorage: 1; Read: [1 ]
Relay[0]: restored relay state: ON
 **** Digital write[0], pin: 12; value: 0
Channel(0) value changed to 1
Initializing network layer
WiFi: establishing connection with SSID: "WiFi"
Using Supla protocol version 12
Current status: [5] SuplaDevice initialized
Current status: [8] No connection to network
local IP: 192.168.0.108
subnetMask: 255.255.255.0
gatewayIP: 192.168.0.1
Signal Strength (RSSI): -67 dBm
Establishing Secured connection with: svr9.supla.org (port: 2016)
Connected to Supla Server
Current status: [10] Register in progress
Device registered (activity timeout 120 s, server version: 16, server min version: 1)
Current status: [17] Registered and ready
Changing activity timeout to 30
Activity timeout set to 30 s

krycha88
Posty: 5187
Rejestracja: pt lis 16, 2018 7:25 am
Kontakt:

pewnie ten sam problem:
https://github.com/arendst/Tasmota/issues/9084

Jakiej przeglądarki używasz? czy możesz sprawdzić to w innej przeglądarce?
https://gui-generic-builder.supla.io/
ODPOWIEDZ

Wróć do „GUI Generic”