Hi, All!
First of all, very nice project, nice concept and cool grafic. I like It!
That my problem: I don't see any response on GPIO12 change state from pullup at Vcc to Gnd.
Is it implemented yet or not? Is it picture of gate/rollers/liquid must change like a lamp?
hardware: esp8266 esp12 from ai-thinker just buttons and LED thermometer is on the way from china.
Mike
Don't see a sensor response (solved)
-
- Posts: 16
- Joined: Thu Apr 14, 2016 6:10 pm
Last edited by jangolen on Fri Apr 15, 2016 5:43 pm, edited 1 time in total.
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
Which firmware do you use ?
-
- Posts: 16
- Joined: Thu Apr 14, 2016 6:10 pm
SUPLA-RS-MODULE rollershutter-module-firmware v1.2
files eagle.flash.bin from github dowloaded 11.04
I also tried gate firmware with same effect.
files eagle.flash.bin from github dowloaded 11.04
I also tried gate firmware with same effect.
-
- Posts: 16
- Joined: Thu Apr 14, 2016 6:10 pm
I found my mistake in polish topics there
Now it's work perfect.
Sensor is connecting input to power +3.3V not the ground (as always I do in my projects). In my opinion is much safer not to expose power source to sensor beware to shortcut. But I am agree with you in that case, output and input together is difficult to do without conflicts.
Thank You for your job. Maybe I can help with translate Supla site in russian if you want to do this.
Now it's work perfect.
Sensor is connecting input to power +3.3V not the ground (as always I do in my projects). In my opinion is much safer not to expose power source to sensor beware to shortcut. But I am agree with you in that case, output and input together is difficult to do without conflicts.
Thank You for your job. Maybe I can help with translate Supla site in russian if you want to do this.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
I'm glad that everything works. You can join to team and help us with translation if you want.
-
- Posts: 16
- Joined: Thu Apr 14, 2016 6:10 pm
Hi!
I really love this projects, and agree to help him wide spread. Send me in private english language pack and I translate it back to you.
I really love this projects, and agree to help him wide spread. Send me in private english language pack and I translate it back to you.
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
-
- Posts: 16
- Joined: Thu Apr 14, 2016 6:10 pm
Uff... Done for CLOUD in 2 files
please see pull request
don't now is't done all right because it is my first work of same sort
Hope it is be useful for SUPLA
please see pull request
don't now is't done all right because it is my first work of same sort
Hope it is be useful for SUPLA
-
- Posts: 18354
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
Thank you for translations, please read private message from me.