Hi, All!
First of all, very nice project, nice concept and cool grafic. I like It!
That my problem: I don't see any response on GPIO12 change state from pullup at Vcc to Gnd.
Is it implemented yet or not? Is it picture of gate/rollers/liquid must change like a lamp?
hardware: esp8266 esp12 from ai-thinker just buttons and LED thermometer is on the way from china.
Mike
Don't see a sensor response (solved)
Which firmware do you use ?
I found my mistake in polish topics there
Now it's work perfect.
Sensor is connecting input to power +3.3V not the ground (as always I do in my projects). In my opinion is much safer not to expose power source to sensor beware to shortcut. But I am agree with you in that case, output and input together is difficult to do without conflicts.
Thank You for your job. Maybe I can help with translate Supla site in russian if you want to do this.
Now it's work perfect.
Sensor is connecting input to power +3.3V not the ground (as always I do in my projects). In my opinion is much safer not to expose power source to sensor beware to shortcut. But I am agree with you in that case, output and input together is difficult to do without conflicts.
Thank You for your job. Maybe I can help with translate Supla site in russian if you want to do this.
I'm glad that everything works. You can join to team and help us with translation if you want.
Thank you for translations, please read private message from me.