Supla Button 4 direct links

[elmaya]

would it be possible to connect a PIR sensor?

yes for active high you can use bistable to toggle state while the sensor is active
what do you have in mind?

[maffiu]

thanks, I will check and show results

[elmaya]

direct link Pir



fast Led flash 0.2": WiFi config
slow Led flash 0.8": connecting WiFi
2 short Led flashes: link send successfull

Link 1 - link sent when the sensor is high
Link 2 - link sent when the sensor is low

pinout:
wifi config - D3 - Gpio 0
status Led - D4 - Gpio 2
Sensor Pin - D6 - Gpio12

Initial parameters for "ESP Falsh Download Tool":

CreystalFreq 26M
SPI SPEED 40 MHz
SPI MODE DOUT
BAUDRATE 11520
FLASH SIZE 32Mbit (4MByte)

D_Link_Pir.bin ------------> 0x00000

[miko1282]

Why can not I unpack this rar archive? It's empty

[elmaya]

winRar V5???

[miko1282]

winRar V5???

Yes, even newer than 5v :/

[Jeki87]

hi, whether on wemosa, for example https://botland.com.pl/pl/produkty-wyco ... duino.html, will it work soft Direct link 6?
or it must be a pro version

[elmaya]

hi, whether on wemosa, for example https://botland.com.pl/pl/produkty-wyco ... duino.html, will it work soft Direct link 6?
or it must be a pro version

it will work

[miko1282]

Hi, why configuration are not the saved after unplugging the power and connecting them?

[elmaya]

Hi, why configuration are not the saved after unplugging the power and connecting them?

which software,which esp,arduino or Bin?