Supla Pushover Mini Alarm

elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

Post

Supla Pir Pushover Mini Alarm
It consists of a Pir motion sensor which is activated / deactivated from the Supla App,
If the sensor is activated and detects movement, it sends the message that we have defined in WiFiconfig to the Pushover service.
Connections:
Gpio 0 - D3 WiFiconfig
Gpio 2 - D4 Led
Gpio12 - D6 Pir Sensor
HC-SR501.png
Reed-ESP8266_bb.png
To enter or change the settings:
To enter the WiFi configuration mode, press and hold the button for at least 5 seconds.
When in Wi-Fi configuration mode, the device enters Wi-Fi access point mode and the status LED turns on.
- Log in to https://cloud.supla.org (registration is free) and Activate registration for new device.
- Connect to the WiFi called "Supla_Pir_Push" from any device with wireless network and an Internet browser.
- Open the Page: http://192.168.4.1
- Tap Configure WiFi.

Image
 
- On the configuration page
- Select the Wi-Fi network at the top by pressing the appropriate one and then enter the password.
- enter the data to:
suplaServer (svrX.supla.org),
Email (registration email in supla),
Supla Device Name (name with which it will be seen in the cloud),
App Token (Pushover Api Token)
User Token (Pushover User Token)
Alarm Message (we write the text of the message) 
select Sound (Pushover notification sound)
- To finish click on Save to save the configuration data.

Firmware update through the OTA web browser - http: // XX: 81 / update
xx = Device IP. For example http://192.168.1.22:81/update
User: admin
Password: pass

pir_Pushover_DOUT_16Mbit.rar
You do not have the required permissions to view the files attached to this post.
meliwal
Posts: 16
Joined: Fri Oct 26, 2018 4:47 pm

Post

and how about notifications by gsm. add a sim800 module as an example :D
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

Post

At the moment there is no support for Sim800 in Arduino V 2.3
User avatar
QLQ
Posts: 2286
Joined: Sun Sep 03, 2017 9:13 am
Location: Koszalin

Post

elmaya wrote: Wed Jan 29, 2020 2:09 pm Supla Pir Pushover Mini Alarm
It consists of a Pir motion sensor which is activated / deactivated from the Supla App,
How?? Light switch on/off or power on off ?

Message Pushover works very good as always super work :D
jak coś nie działa to włącz zasilanie.....
DropsNH
Posts: 19
Joined: Tue Sep 20, 2022 7:38 am

Post

Hello, does anyone have or is there an option to add several PIRs to 1 chip? To reduce the number of used ESPs in the network.
e.g. PIR regarding:
GPIO3
GPIO4
GPIO5
GPIO12
GPIO13
GPIO14
with the possibility of deactivating individual sensors.
WłączWyłącz
Posts: 4
Joined: Sat Aug 19, 2023 3:25 pm

Post

Yes. It is possible to add multiple PIR sensors to GPIOs you mentioned. I started to build silent alarm with PIR sensor using native Supla messages (no need to use Pushover) by using Reactions for the sensor.
I used relays to disconnect/connect PIR sensors to be able to turn off messages when I am at home,
zilhos
Posts: 18
Joined: Sat Aug 10, 2019 2:52 am

Post

Hello, is there a version of this alarm or a similar one with native supla notifications?Thank you
User avatar
pzygmunt
Posts: 18632
Joined: Tue Jan 19, 2016 9:26 am
Location: Paczków

Post

I think @WrząWyłam has already answered.

Return to “Ideas and concepts”