Hello,
I byu two sensors AM2201 in ALI, nothing is working.
But internal wiring is different from the previous, ones that I have
- foto
Is needed another firmware for SUPLA?
Please help!
Sincerelly
sensor SONOFF AM2301 - new version or fake?
Thank you!
Solved for TH 10
I used this settings:
boot_v1.5.bin -------->0x00000
esp_init_data_default.bin -------0xfc000
sonoff_th10_user1.1024.new.2.bin---->0x01000
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin -------->0x00000
BAUDRATE: 115200
Flash Size: 8MBit
Flash speed: 40Mhz
SPI Mode: DIO
site 192.168.4.1:81
password 12345678
Solved for TH 10
I used this settings:
boot_v1.5.bin -------->0x00000
esp_init_data_default.bin -------0xfc000
sonoff_th10_user1.1024.new.2.bin---->0x01000
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin -------->0x00000
BAUDRATE: 115200
Flash Size: 8MBit
Flash speed: 40Mhz
SPI Mode: DIO
site 192.168.4.1:81
password 12345678