Hello,
I byu two sensors AM2201 in ALI, nothing is working.
But internal wiring is different from the previous, ones that I have
- foto
Is needed another firmware for SUPLA?
Please help!
Sincerelly
sensor SONOFF AM2301 - new version or fake?
-
- Posts: 9
- Joined: Fri Oct 18, 2019 7:20 am
You do not have the required permissions to view the files attached to this post.
-
- Posts: 1482
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
-
- Posts: 9
- Joined: Fri Oct 18, 2019 7:20 am
Thank you!
Solved for TH 10
I used this settings:
boot_v1.5.bin -------->0x00000
esp_init_data_default.bin -------0xfc000
sonoff_th10_user1.1024.new.2.bin---->0x01000
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin -------->0x00000
BAUDRATE: 115200
Flash Size: 8MBit
Flash speed: 40Mhz
SPI Mode: DIO
site 192.168.4.1:81
password 12345678
Solved for TH 10
I used this settings:
boot_v1.5.bin -------->0x00000
esp_init_data_default.bin -------0xfc000
sonoff_th10_user1.1024.new.2.bin---->0x01000
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin -------->0x00000
BAUDRATE: 115200
Flash Size: 8MBit
Flash speed: 40Mhz
SPI Mode: DIO
site 192.168.4.1:81
password 12345678
-
- Posts: 2214
- Joined: Sun Apr 03, 2016 7:16 pm
- Location: Olsztyn
Erase sonoff content and then upload this file:
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin --------> 0x00000
These first files are not needed.
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin --------> 0x00000
These first files are not needed.
Pozdrawiam
Wojtek
Wojtek