sensor SONOFF AM2301 - new version or fake?

Post Reply
rhoracek
Posts: 9
Joined: Fri Oct 18, 2019 7:20 am

Hello,
I byu two sensors AM2201 in ALI, nothing is working.
But internal wiring is different from the previous, ones that I have
- foto
20191226_103328.jpg
20191226_103328.jpg (163.63 KiB) Viewed 2738 times
20191226_103313.jpg
20191226_103313.jpg (229.29 KiB) Viewed 2738 times
20191226_103256.jpg
20191226_103256.jpg (298.82 KiB) Viewed 2738 times
Is needed another firmware for SUPLA?
Please help!
Sincerelly
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

rhoracek
Posts: 9
Joined: Fri Oct 18, 2019 7:20 am

Thank you!

Solved for TH 10




I used this settings:
boot_v1.5.bin -------->0x00000
esp_init_data_default.bin -------0xfc000
sonoff_th10_user1.1024.new.2.bin---->0x01000
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin -------->0x00000

BAUDRATE: 115200
Flash Size: 8MBit
Flash speed: 40Mhz
SPI Mode: DIO

site 192.168.4.1:81
password 12345678
User avatar
wojtas567
Posts: 2209
Joined: Sun Apr 03, 2016 7:16 pm
Location: Olsztyn

Erase sonoff content and then upload this file:
Primary_GUI_sonoff2_Si3_DHT_sens_182.bin --------> 0x00000
These first files are not needed.
Pozdrawiam
Wojtek
Post Reply

Return to “Help”