hi. i was trying test supla and doing exatly same like manual but still not work... i have a rasperry pi 3b and android phone. Look a pictures:
have any ideas? what i was doing wrong?
i cant work it
Hi. Current sd card image doesn't support raspberry pi 3. You have to install supla software manually. Please type few commands at console:
cd
git clone https://github.com/SUPLA/raspberry
rm raspberry/ext01/boot/config.txt
sudo cp -r raspberry/ext01/* /
sudo update-rc.d supla-dev defaults
sudo nano /boot/location.txt
sudo /etc/init.d/supla-dev start
cd
git clone https://github.com/SUPLA/raspberry
rm raspberry/ext01/boot/config.txt
sudo cp -r raspberry/ext01/* /
sudo update-rc.d supla-dev defaults
sudo nano /boot/location.txt
sudo /etc/init.d/supla-dev start
Yes, you should use dedicated image of SD Card contained Linux. Then you can install supla software manually.
Please check last state
cat /boot/last_state.txt
cat /boot/last_state.txt
It looks like the device is connected to the server.
Please login at cloud.supla.org and check if devices status is "CONNECTED".
Probably you should select channel functions at cloud.supla.org.
Please login at cloud.supla.org and check if devices status is "CONNECTED".
Probably you should select channel functions at cloud.supla.org.
Your welcome