Supla SRW01 (Blinking)

Post Reply
MacManiac78
Posts: 1
Joined: Sat Jan 26, 2019 2:30 pm

I have tried to add the Supla SRW01 on my WiFi network. After pushing down the red button, the green LED starts flashing. Than I log into the SRW01 by IP 192.168.4.1 and add the SSID and password + Supla Settings. svr9.supla.com..... **email adres** and SAVE
And push the red button down again.

SRW01 did flash a while than flashed twice for a longer while and so on.
Now I changed modem config and the SRW01 is online.
Post Reply

Return to “General discussion”