SONOFF
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
I flashed firmware from your link and it worked but firmware from the IoT SDK is not working. What could be the reason?
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
The firmware which I am flashing is built from IoTSDK. I have installed the latest SDK still the firmware is getting flashed with proper configuration as discussed earlier but doesn't works.
Kindly help.
Kindly help.
-
- Posts: 18356
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
What do you see on the console ?
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
I didn't checked the console. But I flashed firmware next day and it worked. I don't know what happened but it worked.
Can you tell me that is there anyway to integrate the wall switch to sonoff so that I can control it locally.
Is there anyway?
Can you tell me that is there anyway to integrate the wall switch to sonoff so that I can control it locally.
Is there anyway?
-
- Posts: 18356
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
You can connect wall switch to the sonoff button.
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
Not like using sonoff button. But using live or neutral wire connection from the wall switch to sonoff. I have seen some devices which provide live wire input switch so that we can use the existing switches. Like this device.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 18356
- Joined: Tue Jan 19, 2016 9:26 am
- Location: Paczków
I'm sorry but I do not understand what you want to do.
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
I want to integrate wall switch to the devices like sonoff so that I can control fans and lights from supla application as well as from wall switch.
-
- Posts: 82
- Joined: Mon May 08, 2017 9:49 am
I have changed #define CFG_BTN_PRESS_COUNT 10 to #define CFG_BTN_PRESS_COUNT 5 still it takes 10 press to enter config mode. What could be the reason?