IR receiver with 2 Action Trigger channels "12 functions"
Action Trigger can be activated by infrared remote control or local buttons.
Gpio 5 "D1" = button AT 0.
Gpio 4 "D1" = button AT 1.
Gpio 0 "D3" = WiFiConfig 5 seconds.
Gpio 2 "D4" = Led.
Gpio 14 "D5" = IR in.
Access through browser using the IP of the module or using mDNS "http: /XXXX.local" (being XXXX the name defined for the module in WiFiConfig"do not use spaces or special characters in the name").
The configuration page is in English, if you have activated the browser's translator to another language it will not work.
main page:
1 - link to main page / reload page.
2 - link to Stored IR codes page.
3 - shows the connection status with Supla server / link to "cloud.supla.org/login".
4 - shows the last 5 received IR codes, the most recent at the top.
5 - to save the IR code "see below".
IR save page: "pressing" 5 "on the main page".
8 - corresponding IR code.
9 - dropdown list to select Action Trigger function for the IR code.
10 - name "to be able to easily identify, for example if it is the volume up key on the remote control, you could define V + as name ".
11 - save the IRcode, function and name.
example of the 12 functions.
the firmware is compiled in QIO mode 16Mbit.
make sure to select the QIO mode when uploading.