Smart DGM DSG-W162

elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

using the pulse counter channel for the energy meter and a temperature and humidity channel for voltage and wattage.
It is not an ideal solution but waiting for the implementation of energy meter can be a temporary solution.

Image
Image


To access the Wi-Fi configuration, press button for at least 10 seconds, Led winks in wificonfig.
in the configuration page enter the data for "suplaServer, Email and Supla Device Name (name with which it will be seen in the cloud and DHCP)"

Image

read-only field with the latest Supla connection state.

expectedVoltage -- for calibration.

expectedActivePower -- for calibration.

clear counter -- reset pulse counter.

calibration process:
connect a resistive load with a known consumption, for example a 60W bulb.
access wificonfig (button pressed 10 seconds)
in the "expectedVoltage" field set the voltage of your line for example 227.
in the "expectedActivePower" field, set the consumption of the connected load, for example 60.
press save.
The procedure takes about 15 seconds, then the device restarts and the readings will be correct.
the calibration is only executed if there are data in both fields "expectedVoltage" and "expectedActivePower"
This allows for example to change the Wi-Fi network without recalibrating.

Active Power (W) reading in the humidity channel will be /10
11.1 corresponds to a consumption of 111W

OTA update http://XX:81/update -- xx = device ip. for example http://192.168.1.22:81/update
user: admin
password: pass
DSG_W162_V4_DOUT_8Mbit.rar
compiled firmware
(295.73 KiB) Downloaded 302 times
PioKar
Posts: 411
Joined: Thu May 03, 2018 5:56 am

Może komuś się przyda.
Kupiłem.
Model: PP-W162
Producent: SmartDGM
https://allegro.pl/oferta/gniazdko-inte ... M2RhMDg%3D

Soft działa dobrze.
Dziękuję.
User avatar
PuteR
Posts: 1421
Joined: Wed Dec 06, 2017 10:07 am

elmaya Have you updated the soft with Energi counter support for this socket?
Budek
Posts: 172
Joined: Sun Apr 08, 2018 2:53 pm

elmaya wrote: Mon Jan 06, 2020 10:41 am using the pulse counter channel for the energy meter and a temperature and humidity channel for voltage and wattage.
It is not an ideal solution but waiting for the implementation of energy.
@Elmaya, czy moglibyśmy prosić o aktualizacje softu dla DSG-W162 ??

Czy to gniazdko jest podobne do Gosund SP111 ??

/Budek
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

Budek wrote: Wed Jan 06, 2021 12:17 pm
elmaya wrote: Mon Jan 06, 2020 10:41 am using the pulse counter channel for the energy meter and a temperature and humidity channel for voltage and wattage.
It is not an ideal solution but waiting for the implementation of energy.
@Elmaya, could we ask for a firmware update for DSG-W162 ??

Is this socket similar to the Gosund SP111 ??

/ Budek
DSG-W162 uses different Gpio than Gosund SP111

current version ;)
SmartDGM_DOUT_8Mbit.rar
(379.43 KiB) Downloaded 169 times
Budek
Posts: 172
Joined: Sun Apr 08, 2018 2:53 pm

elmaya wrote: Wed Jan 06, 2021 1:05 pm
Budek wrote: Wed Jan 06, 2021 12:17 pm
elmaya wrote: Mon Jan 06, 2020 10:41 am using the pulse counter channel for the energy meter and a temperature and humidity channel for voltage and wattage.
It is not an ideal solution but waiting for the implementation of energy.
@Elmaya, could we ask for a firmware update for DSG-W162 ??

Is this socket similar to the Gosund SP111 ??

/ Budek
DSG-W162 uses different Gpio than Gosund SP111

current version ;)
SmartDGM_DOUT_8Mbit.rar
Dziekuje. Wgralem. Sterowanie ok.
Niestety po kalibracji zarowka 100w mam na liczniku wskazanie 270w. Mógłbyś sprawdzić czy z kalibracja jest wszystko ok ??

/Budek
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

Budek wrote: Wed Jan 06, 2021 1:42 pm
elmaya wrote: Wed Jan 06, 2021 1:05 pm
Budek wrote: Wed Jan 06, 2021 12:17 pm

@Elmaya, could we ask for a firmware update for DSG-W162 ??

Is this socket similar to the Gosund SP111 ??

/ Budek
DSG-W162 uses different Gpio than Gosund SP111

current version ;)
SmartDGM_DOUT_8Mbit.rar
Thank you. I uploaded. Control ok.
Unfortunately, after calibrating the 100w bulb, I have 270w on the meter. Could you check if the calibration is ok?

/Budek
the calibration is the same in all my softwares, it has always been correct.
make sure to connect a pure resistive load and repeat the process.
the voltage entered must be correct.
Budek
Posts: 172
Joined: Sun Apr 08, 2018 2:53 pm

elmaya wrote: Wed Jan 06, 2021 1:54 pm
Budek wrote: Wed Jan 06, 2021 1:42 pm
elmaya wrote: Wed Jan 06, 2021 1:05 pm
DSG-W162 uses different Gpio than Gosund SP111

current version ;)
SmartDGM_DOUT_8Mbit.rar
Thank you. I uploaded. Control ok.
Unfortunately, after calibrating the 100w bulb, I have 270w on the meter. Could you check if the calibration is ok?

/Budek
the calibration is the same in all my softwares, it has always been correct.
make sure to connect a pure resistive load and repeat the process.
the voltage entered must be correct.
@Elmaya, obejrzyj film. Robie save i nic się nie dzieje. Czekam kolo 20 sekund.

https://photos.app.goo.gl/FCRJtTYTC5KD6s8U7

/Budek
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

I can't watch the video!
it just says that it will be available soon. :lol: :lol:

How did you upload the firmware?
Budek
Posts: 172
Joined: Sun Apr 08, 2018 2:53 pm

elmaya wrote: Wed Jan 06, 2021 4:30 pm I can't watch the video!
it just says that it will be available soon. :lol: :lol:

How did you upload the firmware?
Firmware wgralem przez OTA. Stary > GUI updater > nowy.

/Budek
Post Reply

Return to “Ideas and concepts”