DirectLink remote control for Supla Thermostat

kotogi
Posts: 78
Joined: Thu Sep 24, 2020 11:02 pm

And this is what it looks like for „Remote display for 1 phase electricity meter based on DirectLink”
Which has no problems


mounted file system
reading config file
opened config file
40
{"Supla_server":"svr41.supla.org","D_Link_1":"/direct/840/dcg3ViWd8hZo/read"}
par sed json
.
Connected
Adres IP:
192.168.0.145 / 255.255.255.0 / 192.168.0.1
(RSSI): -64 dBm
connecting to svr41.supla.org
requesting URL: /direct/840/dcg3ViWd8hZo/read
request sent
headers received
reply was:
==========
{"connected":true,"support":383,"currency":"PLN","pricePerUnit":0.7,"totalCost": 825.33,"phases":[{"number":1,"frequency":50,"voltage":238.9,"current":0.075,"pow erActive":6.8,"powerReactive":1.65769,"powerApparent":17.9175,"powerFactor":0.38 ,"totalForwardActiveEnergy":1179.05704},{"number":2,"frequency":50,"voltage":0," current":0,"powerActive":0,"powerReactive":0,"powerApparent":0,"powerFactor":0," totalForwardActiveEnergy":0},{"number":3,"frequency":50,"voltage":0,"current":0, "powerActive":0,"powerReactive":0,"powerApparent":0,"powerFactor":0,"totalForwar dActiveEnergy":0}]}
==========
closing connection
connecting to svr41.supla.org
requesting URL: /direct/840/dcg3ViWd8hZo/read
request sent
headers received
reply was:
==========
{"connected":true,"support":383,"currency":"PLN","pricePerUnit":0.7,"totalCost":825.33,"phases":[{"number":1,"frequency":50,"voltage":239.3,"current":0.075,"powerActive":6.9,"powerReactive":1.65681,"powerApparent":17.9475,"powerFactor":0.38,"totalForwardActiveEnergy":1179.05704},{"number":2,"frequency":50,"voltage":0,"current":0,"powerActive":0,"powerReactive":0,"powerApparent":0,"powerFactor":0,"totalForwardActiveEnergy":0},{"number":3,"frequency":50,"voltage":0,"current":0,"powerActive":0,"powerReactive":0,"powerApparent":0,"powerFactor":0,"totalForwardActiveEnergy":0}]}
==========
closing connection
connecting to svr41.supla.org
requesting URL: /direct/840/dcg3ViWd8hZo/read
request sent
headers received
reply was:
==========
{"connected":true,"support":383,"currency":"PLN","pricePerUnit":0.7,"totalCost":825.33,"phases":[{"number":1,"frequency":49.9,"voltage":239,"current":0.075,"powerActive":6.9,"powerReactive":1.65437,"powerApparent":17.925,"powerFactor":0.38,"totalForwardActiveEnergy":1179.05704},{"number":2,"frequency":49.9,"voltage":0,"current":0,"powerActive":0,"powerReactive":0,"powerApparent":0,"powerFactor":0,"totalForwardActiveEnergy":0},{"number":3,"frequency":49.9,"voltage":0,"current":0,"powerActive":0,"powerReactive":0,"powerApparent":0,"powerFactor":0,"totalForwardActiveEnergy":0}]}
==========
closing connection
connecting to svr41.supla.org
Pytam tylko jak muszę.
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

try this

Code: Select all

#include <FS.h>       // ---- esp board manager 2.7.4 ----
#include <WiFiClientSecure.h>
#include <ESP8266WiFi.h>
#include <DNSServer.h>
#include <WiFiManager.h>     //--------- https://github.com/tzapu/WiFiManager/tree/0.14 -------------
#include <ArduinoJson.h>     //--------- https://github.com/bblanchon/ArduinoJson/tree/v5.13.2 ------

//#define D0 16  //no internal pullup resistor
//#define D1  5
//#define D2  4
//#define D3  0  //must not be pulled low during power on/reset, toggles value during boot
//#define D4  2  //must not be pulled low during power on/reset, toggles value during boot
//#define D5 14
//#define D6 12
//#define D7 13
//#define D8 15  //must not be pulled high during power on/reset

int button_1 = 5 ; //D1     // triger Link 1  and wifi config 
int button_2 = 4 ; //D2     // triger Link 2
int button_3 = 14; //D5     // triger Link 3
int button_4 = 12; //D6     // triger Link 4
#define BTN_COUNT 4
//#include "SSD1306Wire.h" //----- 0.96 Oled --- https://github.com/ThingPulse/esp8266-oled-ssd1306
//SSD1306Wire  display(0x3c, 0, 2);  // D3-SDA  D4-SCL ----- 0.96 Oled ---
#include "SH1106Wire.h" //----- 1.3 Oled ---
SH1106Wire display(0x3c, 0, 2);  // D3-SDA  D4-SCL ----- 1.3 Oled ---

const char* host = ".org";
const int httpsPort = 443;
char Supla_server[20];
char D_Link_1[61];
char D_Link_2[61];
char D_Link_3[61];
char Link_T[61];
char Link_T2[61];
byte mac[6];
String url = "/direct";
bool shouldSaveConfig = false;
bool initialConfig = false;
bool dimm = false;         
unsigned long dimm_milis ;
bool Read1on = false;
bool Read2on = false;
bool onsend = false;
bool pr_wifi = false;
bool can1 = false;
bool can2 = false;
int Temp_mtbs = 5000;                //Temperature update interval 5 seconds
unsigned long Temp_lasttime; 
int TempDisp_mtbs = 2500;                //Temperature display interval 2.5 seconds
unsigned long TempDisp_lasttime; 
int lcd_n = 0;
int up_n = 0;
double Temp = -127.0;
double Temp2 = -127.0;
unsigned long wifi_checkDelay = 20000;  // wifi reconnect delay tray to reconnect every 20 seconds ------------ Wi-Fi podłącz tacę opóźniającą, aby ponownie połączyć się co 20 sekund
unsigned long wifimilis;   // 
int C_W_state = HIGH;            
int last_C_W_state = HIGH;       
unsigned long time_last_C_W_change = 0;   
long C_W_delay = 10000;               // config delay 10 seconds  ------------ opóźnienie konfiguracji 10 sekund
int row = 0;
int timeout  = 180; // seconds to run for

const uint8_t logo32_glcd_bmp[] PROGMEM =  //logo supla 32
{
  0x00,0x00,0x00,0x00,0xC0,0x1F,0x00,0x00,0xE0,0x7F,0x00,0x00,
  0xF0,0x70,0x00,0x00,0x30,0xE0,0x00,0x00,0x38,0xC0,0x00,0x00,
  0x18,0xC0,0x01,0x00,0x18,0xC0,0x01,0x00,0x38,0xC0,0x00,0x00,
  0x38,0xE0,0x01,0x00,0x70,0xF0,0x07,0x00,0xE0,0x7F,0x0E,0x00,
  0xC0,0x3F,0x38,0x00,0x00,0x1F,0xE0,0x0F,0x00,0x18,0xC0,0x1F,
  0x00,0x18,0xC0,0x30,0x00,0x18,0xC0,0x30,0x00,0x30,0xC0,0x30,
  0x00,0x30,0x80,0x1F,0x00,0x30,0xC0,0x0F,0x00,0x20,0x60,0x00,
  0x00,0x60,0x20,0x00,0x00,0x60,0x30,0x00,0x00,0x40,0x18,0x00,
  0x00,0xC0,0x0D,0x00,0x00,0xC0,0x07,0x00,0x00,0x60,0x04,0x00,
  0x00,0x20,0x0C,0x00,0x00,0x20,0x0C,0x00,0x00,0x60,0x06,0x00,
  0x00,0xC0,0x03,0x00,0x00,0x00,0x00,0x00
};
const uint8_t logo16_wifi_bmp[] PROGMEM =  //logo wifi 16
{
  0x00,0x00,0x00,0x00,0xE0,0x07,0x38,0x1C,0xC4,0x23,0x72,0x4E,
  0x08,0x10,0xE4,0x27,0x10,0x0C,0x90,0x09,0x40,0x02,0x60,0x06,
  0x40,0x02,0x80,0x01,0x00,0x00,0x00,0x00
};
const uint8_t logo16_supla_bmp[] PROGMEM =  //logo supla 16
{
  0x30,0x00,0x7C,0x00,0xC4,0x00,0x86,0x00,0x84,0x00,0xDC,0x03,
  0x78,0x36,0x60,0x78,0x40,0x48,0x40,0x38,0x40,0x04,0x80,0x06,
  0x80,0x03,0x40,0x02,0xC0,0x03,0x00,0x01
};

const uint8_t logo_Power_off[] PROGMEM =  //Power off
{
  0xe0, 0xff, 0xff, 0xff, 0x03, 0x38, 0xfc, 0xff, 0xff, 0x0f, 0x0c, 0xf0,
   0xff, 0xff, 0x3f, 0x06, 0xe0, 0xff, 0xff, 0x3f, 0x02, 0xc0, 0xcf, 0x43,
   0x78, 0x03, 0xc0, 0x33, 0x43, 0x78, 0x01, 0xc0, 0x7b, 0x7b, 0xff, 0x01,
   0x80, 0xfd, 0x42, 0xf8, 0x01, 0x80, 0xfd, 0x42, 0xf8, 0x01, 0x80, 0x7b,
   0x7b, 0xff, 0x03, 0xc0, 0x33, 0x7b, 0xff, 0x02, 0xc0, 0xcf, 0x7b, 0x7f,
   0x06, 0xe0, 0xff, 0xff, 0x7f, 0x0c, 0xf0, 0xff, 0xff, 0x3f, 0x18, 0xfc,
   0xff, 0xff, 0x1f, 0xf0, 0xff, 0xff, 0xff, 0x07, 
};
const uint8_t logo_Power_on[] PROGMEM =  //Power on
{
   0xe0, 0xff, 0xff, 0xff, 0x07, 0x38, 0x00, 0x00, 0x30, 0x0c, 0x0c, 0x00,
   0x00, 0x18, 0x18, 0x06, 0x00, 0x00, 0x0c, 0x30, 0x02, 0x0e, 0x00, 0x06,
   0x60, 0x03, 0x9f, 0x19, 0x02, 0x40, 0x81, 0xb1, 0x1b, 0x03, 0xc0, 0x81,
   0xa0, 0x1a, 0x01, 0x80, 0x81, 0xa0, 0x1e, 0x01, 0x80, 0x81, 0xb1, 0x1c,
   0x01, 0xc0, 0x03, 0x9b, 0x18, 0x03, 0x40, 0x02, 0x8e, 0x18, 0x02, 0x60,
   0x06, 0x00, 0x00, 0x06, 0x20, 0x0c, 0x00, 0x00, 0x0c, 0x38, 0x38, 0x00,
   0x00, 0x18, 0x0c, 0xe0, 0xff, 0xff, 0xff, 0x07,
};
typedef struct {  //------------------------------------------- BTN ----------------------------------------------------
  int pin;
  char last_val;
  unsigned long last_time;
} _btn_t;

_btn_t btn[BTN_COUNT];
void btn_init() {
  for(int a=0;a<BTN_COUNT;a++)
    if (btn[a].pin > 0) {
        pinMode(btn[a].pin-1, INPUT_PULLUP);
        btn[a].last_val = digitalRead(btn[a].pin-1);
        btn[a].last_time = millis();
    }
}
void saveConfigCallback () {
  Serial.println("Should save config");
  shouldSaveConfig = true;
}
void ondemandwifiCallback () {
          display.clear();
          display.setContrast(100, 241, 64);
          display.setTextAlignment(TEXT_ALIGN_CENTER);
          display.setFont(ArialMT_Plain_10);
          display.drawString(64, 16, "wifi config connect");
          display.drawString(64, 28, "to wifi hotspot");
          display.setFont(ArialMT_Plain_16);
          display.drawString(64, 44, "RemoteThermostat"); 
          display.display();    
  WiFiManagerParameter custom_Supla_server("server", "supla server", Supla_server, 20);
  WiFiManagerParameter custom_D_Link_1("LinkA", "D_Link_1", D_Link_1, 61);
  WiFiManagerParameter custom_D_Link_2("LinkB", "D_Link_2", D_Link_2, 61);
  WiFiManagerParameter custom_D_Link_3("LinkC", "D_Link_3", D_Link_3, 61);
  WiFiManagerParameter custom_Link_T("LinkTemp", "Link Temp..", Link_T, 61);
  WiFiManagerParameter custom_Link_T2("LinkTher", "Link Ther..", Link_T2, 61);
 
  WiFiManager wifiManager;

  wifiManager.setSaveConfigCallback(saveConfigCallback);
  
  wifiManager.addParameter(&custom_Supla_server);
  wifiManager.addParameter(&custom_D_Link_1);
  wifiManager.addParameter(&custom_D_Link_2);
  wifiManager.addParameter(&custom_D_Link_3);
  wifiManager.addParameter(&custom_Link_T);
  wifiManager.addParameter(&custom_Link_T2);

  wifiManager.setCustomHeadElement("<style>html{ background-color: #01DF3A;margin-left: auto; margin-right: auto;width:60%;}</style><div class='s'><svg version='1.1' id='l' x='0' y='0' viewBox='0 0 200 200' xml:space='preserve'><path d='M59.3,2.5c18.1,0.6,31.8,8,40.2,23.5c3.1,5.7,4.3,11.9,4.1,18.3c-0.1,3.6-0.7,7.1-1.9,10.6c-0.2,0.7-0.1,1.1,0.6,1.5c12.8,7.7,25.5,15.4,38.3,23c2.9,1.7,5.8,3.4,8.7,5.3c1,0.6,1.6,0.6,2.5-0.1c4.5-3.6,9.8-5.3,15.7-5.4c12.5-0.1,22.9,7.9,25.2,19c1.9,9.2-2.9,19.2-11.8,23.9c-8.4,4.5-16.9,4.5-25.5,0.2c-0.7-0.3-1-0.2-1.5,0.3c-4.8,4.9-9.7,9.8-14.5,14.6c-5.3,5.3-10.6,10.7-15.9,16c-1.8,1.8-3.6,3.7-5.4,5.4c-0.7,0.6-0.6,1,0,1.6c3.6,3.4,5.8,7.5,6.2,12.2c0.7,7.7-2.2,14-8.8,18.5c-12.3,8.6-30.3,3.5-35-10.4c-2.8-8.4,0.6-17.7,8.6-22.8c0.9-0.6,1.1-1,0.8-2c-2-6.2-4.4-12.4-6.6-18.6c-6.3-17.6-12.7-35.1-19-52.7c-0.2-0.7-0.5-1-1.4-0.9c-12.5,0.7-23.6-2.6-33-10.4c-8-6.6-12.9-15-14.2-25c-1.5-11.5,1.7-21.9,9.6-30.7C32.5,8.9,42.2,4.2,53.7,2.7c0.7-0.1,1.5-0.2,2.2-0.2C57,2.4,58.2,2.5,59.3,2.5z M76.5,81c0,0.1,0.1,0.3,0.1,0.6c1.6,6.3,3.2,12.6,4.7,18.9c4.5,17.7,8.9,35.5,13.3,53.2c0.2,0.9,0.6,1.1,1.6,0.9c5.4-1.2,10.7-0.8,15.7,1.6c0.8,0.4,1.2,0.3,1.7-0.4c11.2-12.9,22.5-25.7,33.4-38.7c0.5-0.6,0.4-1,0-1.6c-5.6-7.9-6.1-16.1-1.3-24.5c0.5-0.8,0.3-1.1-0.5-1.6c-9.1-4.7-18.1-9.3-27.2-14c-6.8-3.5-13.5-7-20.3-10.5c-0.7-0.4-1.1-0.3-1.6,0.4c-1.3,1.8-2.7,3.5-4.3,5.1c-4.2,4.2-9.1,7.4-14.7,9.7C76.9,80.3,76.4,80.3,76.5,81z M89,42.6c0.1-2.5-0.4-5.4-1.5-8.1C83,23.1,74.2,16.9,61.7,15.8c-10-0.9-18.6,2.4-25.3,9.7c-8.4,9-9.3,22.4-2.2,32.4c6.8,9.6,19.1,14.2,31.4,11.9C79.2,67.1,89,55.9,89,42.6z M102.1,188.6c0.6,0.1,1.5-0.1,2.4-0.2c9.5-1.4,15.3-10.9,11.6-19.2c-2.6-5.9-9.4-9.6-16.8-8.6c-8.3,1.2-14.1,8.9-12.4,16.6C88.2,183.9,94.4,188.6,102.1,188.6z M167.7,88.5c-1,0-2.1,0.1-3.1,0.3c-9,1.7-14.2,10.6-10.8,18.6c2.9,6.8,11.4,10.3,19,7.8c7.1-2.3,11.1-9.1,9.6-15.9C180.9,93,174.8,88.5,167.7,88.5z'/></svg>");
  wifiManager.setBreakAfterConfig(true);
  wifiManager.setMinimumSignalQuality();

    wifiManager.setConfigPortalTimeout(timeout);

    if (!wifiManager.startConfigPortal("Remote_Thermostat")) {
      Serial.println("failed to connect and hit timeout");
      delay(3000);
      ESP.restart();
      delay(5000);
    }
    Serial.println("connected...yeey :)");
    
    strcpy(Supla_server, custom_Supla_server.getValue());
    strcpy(D_Link_1, custom_D_Link_1.getValue());
    strcpy(D_Link_2, custom_D_Link_2.getValue());
    strcpy(D_Link_3, custom_D_Link_3.getValue());
    strcpy(Link_T, custom_Link_T.getValue());  
    strcpy(Link_T2, custom_Link_T2.getValue());
    
    WiFi.softAPdisconnect(true);   //  close AP
}
void TH_Overlay() {

  display.clear();
   if (Temp > -100){
         display.setFont(ArialMT_Plain_24);
         display.setTextAlignment(TEXT_ALIGN_CENTER);
         display.drawString(64, 20, String(Temp, 2) + "ºC"); 
   }else{
         display.setFont(ArialMT_Plain_24);
         display.setTextAlignment(TEXT_ALIGN_CENTER);
         display.drawString(64, 20, "-----"); 
   }
 if (Read1on == true){ 
   if (can1 == 1){
         display.setFont(ArialMT_Plain_16);
         display.setTextAlignment(TEXT_ALIGN_CENTER);
         display.drawString(64, 48, "Auto Set " + String(Temp2, 1) + "ºC"); 
   }else{
         display.setFont(ArialMT_Plain_16);
         display.setTextAlignment(TEXT_ALIGN_CENTER);
         display.drawString(64, 48, "Manual mode"); 
  } } 
  if (pr_wifi == true){
               display.drawXbm(1, 0, 16, 16, logo16_wifi_bmp);// -------------------------------------------------- oled wifi ok  -------- 
  }
  if (onsend == true){            
               display.drawXbm(24, 0, 16, 16, logo16_supla_bmp);// ------------------------------------------------ oled supla ok --------                                 
  }
  if (Read2on == true){
     if (can2 == 0){
         display.drawXbm(86, 0, 40, 16, logo_Power_off);// ------------------------------------------------- Relay off  --------   
     }
     if (can2 == 1){
         display.drawXbm(86, 0, 40, 16, logo_Power_on);// -------------------------------------------------- Relay on  --------- 
     }  } 
  display.display();
  yield();
  TempDisp_lasttime = millis();  
}
void iterate_btn() {
  char v;
  unsigned long now = millis();
  {
  for(int a=0;a<4;a++)
    if (btn[a].pin > 0) {
        v = digitalRead(btn[a].pin-1);
        if (v != btn[a].last_val && now - btn[a].last_time ) {
           btn[a].last_val = v;
           btn[a].last_time = now;
           delay(75);
           v = digitalRead(btn[a].pin-1);
           if (v==0)
           if (dimm == true){
            dimm_milis = millis() + 15000 ;
            display.setContrast(100, 230, 60);
            dimm = false;
            TH_Overlay();
             return;  
           }else{  
            if (a == 0){
                  onsend = true;
                  TH_Overlay(); 
                  url = D_Link_1;
                  url = (url  + "/toggle");
                  direct_Link();
                  //delay(100);
                  D_Link_read();
                  dimm_milis = millis() + 15000 ; 
                   return;
           }
             if (a == 1){
                  onsend = true;
                  TH_Overlay(); 
                  url = D_Link_2;
                  url = (url  + "/toggle");
                  direct_Link();
                  //delay(100);
                  D_Link_read2();
                  dimm_milis = millis() + 15000 ; 
                   return;                        
              }
                if (a == 2 ) { 
                  onsend = true;
                  TH_Overlay();  
                  url = D_Link_3;
                  url = (url + "/turn-off");
                  direct_Link(); 
                  Temp2_D_Link();
                  dimm_milis = millis() + 15000 ;
                   return;
                 } 
              if (a == 3 ) {
                  onsend = true;
                  TH_Overlay();  
                  url = D_Link_3;
                  url = (url + "/turn-on");
                  direct_Link();
                  Temp2_D_Link();
                  dimm_milis = millis() + 15000 ;
                   return;
                 }        
             }}
      }
    }
}
void setup() {  //------------------------------------------------ Setup ----------------------------------------------

  Serial.begin(115200);

   memset(btn, 0, sizeof(btn));
  btn[0].pin =button_1 +1;          // pin gpio buton  +1
  btn[1].pin =button_2 +1;          // pin gpio buton  +1
  btn[2].pin =button_3 +1;          // pin gpio buton  +1
  btn[3].pin =button_4 +1;          // pin gpio buton  +1  
  btn_init();
  
 display.init();
  display.flipScreenVertically();
   display.setFont(ArialMT_Plain_10);
     display.clear();
      display.setFont(ArialMT_Plain_24);
       display.drawString(33, 40, "SUPLA");
         display.drawXbm(0, 16, 32, 32,logo32_glcd_bmp );
          display.display();
 
  if (WiFi.SSID()==""){ initialConfig = true;} 
      
  Serial.println("mounting FS...");  
  if (SPIFFS.begin()) {
    Serial.println("mounted file system");
    if (SPIFFS.exists("/config.json")) {
      Serial.println("reading config file");
      File configFile = SPIFFS.open("/config.json", "r");
      if (configFile) {
        Serial.println("opened config file");
        size_t size = configFile.size();
        std::unique_ptr<char[]> buf(new char[size]);
        configFile.readBytes(buf.get(), size);
        DynamicJsonBuffer jsonBuffer;         
        JsonObject& json = jsonBuffer.parseObject(buf.get());
        Serial.println(jsonBuffer.size());
        json.printTo(Serial);
        if (json.success()) {
          Serial.println("\nparsed json");
          strcpy(Supla_server, json["Supla_server"]);
          strcpy(D_Link_1, json["D_Link_1"]);
          strcpy(D_Link_2, json["D_Link_2"]);
          strcpy(D_Link_3, json["D_Link_3"]);
          strcpy(Link_T, json["Link_T"]);
          strcpy(Link_T2, json["Link_T2"]);
        } else {Serial.println("failed to load json config");}                       
      }
    }
  } else {Serial.println("failed to mount FS");}
      
  host = Supla_server;
  WiFi.mode(WIFI_STA);
  dimm_milis = millis() + 15000;
}

void loop() { 
    if  (initialConfig)  {
    ondemandwifiCallback () ;
    initialConfig = false; 
  }
  
  if (millis() > dimm_milis){ 
    if (dimm == false){
    display.setContrast(50, 50, 30);
    display.display();
    dimm = true ;     
    }    
    dimm_milis = millis() + 15000 ;
     } 
    
  if (WiFi.status() != WL_CONNECTED) 
   {
    pr_wifi = false;
    WiFi_up();
   }  
   
   iterate_btn();
   
   int C_W_read = digitalRead(button_1);{    
   if (C_W_read != last_C_W_state) {            
     time_last_C_W_change = millis();
   }
   if ((millis() - time_last_C_W_change) > C_W_delay) {     
     if (C_W_read != C_W_state) {     
       Serial.println("Triger sate changed");
       C_W_state = C_W_read;       
       if (C_W_state == LOW) {
        ondemandwifiCallback () ;
       }
     }
    }
   last_C_W_state = C_W_read;            
   }
   
    if (millis() > Temp_lasttime + Temp_mtbs)  {    //-------------Temp_lasttime--------------------

     if (up_n < 5) { up_n = up_n +1;}
             
     if (up_n == 5) {up_n = 1;}
              
     if (up_n == 1){
      onsend = true;
      TH_Overlay();
      Temp_D_Link();
     }
     if (up_n == 2){
      onsend = true;
      TH_Overlay();
      Temp2_D_Link();
     }
     if (up_n == 3){
      onsend = true;
      TH_Overlay();
      D_Link_read();
     }
     if (up_n == 4){
      onsend = true;
      TH_Overlay();
      D_Link_read2();
     }      
    Temp_lasttime = millis();
  }

  if (shouldSaveConfig) {
    Serial.println("saving config");
    DynamicJsonBuffer jsonBuffer;
    JsonObject& json = jsonBuffer.createObject();
    json["Supla_server"] = Supla_server;
    json["D_Link_1"] = D_Link_1;
    json["D_Link_2"] = D_Link_2;
    json["D_Link_3"] = D_Link_3;
    json["Link_T"] = Link_T;
    json["Link_T2"] = Link_T2;
    File configFile = SPIFFS.open("/config.json", "w");
    if (!configFile) {Serial.println("failed to open config file for writing");}    
    json.prettyPrintTo(Serial);
    json.printTo(configFile);
    configFile.close();
    Serial.println("config saved");
    shouldSaveConfig = false;
    WiFi.mode(WIFI_STA);
    delay(3000);
    ESP.restart();
    delay(5000); 
    }
    
  if (millis() > TempDisp_lasttime + TempDisp_mtbs)  {    //-------------TempDisp_lasttime--------------------
    TH_Overlay();
  }
}
void WiFi_up() { 
  if (millis() > wifimilis)  {
  WiFi.begin(); 
  for (int x = 20; x > 0; x--) 
  {
    if (x == 1){
    wifimilis = (millis() + wifi_checkDelay) ; 
    }           
    if (WiFi.status() == WL_CONNECTED) 
    { 
     pr_wifi = true;
     break;                   
    } else{
     delay(500);   
      Serial.print(".");                                         
    }    
  }
  if (WiFi.status() == WL_CONNECTED)
  {
    pr_wifi = true;
    Serial.println("");
    Serial.println("Connected");
    Serial.println("Adres IP: ");
    Serial.print(WiFi.localIP());
    Serial.print(" / ");
    Serial.print(WiFi.subnetMask());
    Serial.print(" / ");
    Serial.println(WiFi.gatewayIP());
    long rssi = WiFi.RSSI();
    Serial.print("(RSSI): ");
    Serial.print(rssi);
    Serial.println(" dBm");
    onsend = true;
      TH_Overlay();
      Temp_D_Link();
      Temp2_D_Link();
      url = D_Link_1;
      D_Link_read();
      url = D_Link_2;
      D_Link_read2();     
  }
  if (WiFi.status() != WL_CONNECTED) 
  {
    Serial.println("");
    Serial.println("connection failed");
    pr_wifi = false;
  } 
 }
}
void direct_Link() {
  
  WiFiClientSecure client; 
  client.setInsecure(); 
  if (!client.connect(host, httpsPort)) {
    Serial.println("connection failed");
    return;
  }
  client.print(String("GET ") + url + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "User-Agent: ESP8266\r\n" +
               "Connection: close\r\n\r\n");
  while (client.connected()) {
    String line = client.readStringUntil('\n');
    if (line == "\r") {
      break;
    }
  }
  String line = client.readStringUntil('}');
  line = line + "}";
  if (line.indexOf("true") >0) {  
  } else {
    Serial.println("failed");
  }
   onsend = false;
   TH_Overlay();      
}
void Temp_D_Link() {
  url = Link_T; 
  WiFiClientSecure client;
  client.setInsecure();
  if (!client.connect(host, httpsPort)) {
    Serial.println("connection failed");
    return;
  }
  client.print(String("GET ") + url + "/read" + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "User-Agent: ESP8266\r\n" +
               "Connection: close\r\n\r\n");
  while (client.connected()) {
    String line = client.readStringUntil('\n');
    if (line == "\r") {
      break;
    }
  }
  String line = client.readStringUntil('}');
  line = line + "}";
  DynamicJsonBuffer  jsonBuffer(200);
    JsonObject& root = jsonBuffer.parseObject(line);
  if (!root.success()) {
    Serial.println("parseObject() failed");
    return;
  }
  Temp = root["temperature"];
  onsend = false;
  TH_Overlay();
}
void Temp2_D_Link() {
  url = Link_T2;
  WiFiClientSecure client;
  client.setInsecure();
  if (!client.connect(host, httpsPort)) {
    Serial.println("connection failed");
    return;
  }
  client.print(String("GET ") + url + "/read" + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "User-Agent: ESP8266\r\n" +
               "Connection: close\r\n\r\n");
  while (client.connected()) {
    String line = client.readStringUntil('\n');
    if (line == "\r") {
      break;
    }
  }
  String line = client.readStringUntil('}');
  line = line + "}";
  DynamicJsonBuffer  jsonBuffer(200);
    JsonObject& root = jsonBuffer.parseObject(line);
  if (!root.success()) {
    Serial.println("parseObject() failed");
    return;
  }
  Temp2 = root["temperature"];
  onsend = false;
  TH_Overlay();
}
void D_Link_read() {
  url = D_Link_1;
  WiFiClientSecure client;
  client.setInsecure();
  if (!client.connect(host, httpsPort)) {
    Serial.println("connection failed");
    Read1on = false;
    return;
  }
  client.print(String("GET ") + url + "/read" + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "User-Agent: ESP8266\r\n" +
               "Connection: close\r\n\r\n");
  while (client.connected()) {
    String line = client.readStringUntil('\n');
    if (line == "\r") {
      break;
    }
  }
  String line = client.readStringUntil('}');
  line = line + "}";
  DynamicJsonBuffer  jsonBuffer(200);
    JsonObject& root = jsonBuffer.parseObject(line);
  if (!root.success()) {
    Serial.println("parseObject() failed");
    Read1on = false;
    return;
  }
  can1 = root["on"];
  Read1on = true;
  onsend = false;
  TH_Overlay();
}
void D_Link_read2() {
  url = D_Link_2;
  WiFiClientSecure client;
  client.setInsecure();
  if (!client.connect(host, httpsPort)) {
    Serial.println("connection failed");
    Read2on = false;
    return;
  }
  client.print(String("GET ") + url + "/read" + " HTTP/1.1\r\n" +
               "Host: " + host + "\r\n" +
               "User-Agent: ESP8266\r\n" +
               "Connection: close\r\n\r\n");
  while (client.connected()) {
    String line = client.readStringUntil('\n');
    if (line == "\r") {
      break;
    }
  }
  String line = client.readStringUntil('}');
  line = line + "}";
  DynamicJsonBuffer  jsonBuffer(200);
    JsonObject& root = jsonBuffer.parseObject(line);
  if (!root.success()) {
    Serial.println("parseObject() failed");
    Read2on = false;
    return;
  }
  can2 = root["on"];
  Read2on = true;
  onsend = false;
  TH_Overlay();
}
kotogi
Posts: 78
Joined: Thu Sep 24, 2020 11:02 pm

I don't know how to make a .bin file from a text file.
Any hint of what program to use ?
Pytam tylko jak muszę.
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

kotogi wrote: Fri Sep 24, 2021 3:53 pm I don't know how to make a .bin file from a text file.
Any hint of what program to use ?
what OLED do you have?
SSD1306 or SH1106?
kotogi
Posts: 78
Joined: Thu Sep 24, 2020 11:02 pm

OLED 1,3" SH1106
Pytam tylko jak muszę.
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

kotogi wrote: Fri Sep 24, 2021 4:44 pm OLED 1,3" SH1106
kotogi
Posts: 78
Joined: Thu Sep 24, 2020 11:02 pm

Thanks . I'm testing right now
Pytam tylko jak muszę.
kotogi
Posts: 78
Joined: Thu Sep 24, 2020 11:02 pm

It seems to me that either me or my internet is not compatible

the display works properly
buttons do not work

Or maybe OLED MAX thermocouple thermostat –please :D

load 0x4010f000, len 3584, room 16
tail 0
chksum 0xb0
csum 0xb0
v2843a5ac
~ld
mounting FS...
mounted file system
reading config file
opened config file
104
{"Supla_server":"svr41.supla.org","D_Link_1":"/direct/846/Qa3EGQzS9HHiX","D_Link_2":"/direct/847/5bPrcodFAD","D_Link_3":"/direct/848/GAhQ7rxvbsp_XPN","Link_T":"/direct/849/BJzF__9WDhnXN","Link_T2":"/direct/852/9oPCZbbDjUFeTs"}
parsed json
.......
Connected
Adres IP:
192.168.0.153 / 255.255.255.0 / 192.168.0.1
(RSSI): -59 dBm
failed ---------- Pressing the auto / manual button----------------
failed
failed
Pytam tylko jak muszę.
elmaya
Posts: 1482
Joined: Wed Jun 27, 2018 5:48 pm
Location: El Saucejo - Sevilla

kotogi wrote: Fri Sep 24, 2021 5:55 pm It seems to me that either me or my internet is not compatible

the display works properly
buttons do not work

Or maybe OLED MAX thermocouple thermostat –please :D

load 0x4010f000, len 3584, room 16
tail 0
chksum 0xb0
csum 0xb0
v2843a5ac
~ld
mounting FS...
mounted file system
reading config file
opened config file
104
{"Supla_server":"svr41.supla.org","D_Link_1":"/direct/846/Qa3EGQzS9HHiX","D_Link_2":"/direct/847/5bPrcodFAD","D_Link_3":"/direct/848/GAhQ7rxvbsp_XPN","Link_T":"/direct/849/BJzF__9WDhnXN","Link_T2":"/direct/852/9oPCZbbDjUFeTs"}
parsed json
.......
Connected
Adres IP:
192.168.0.153 / 255.255.255.0 / 192.168.0.1
(RSSI): -59 dBm
failed ---------- Pressing the auto / manual button----------------
failed
failed
I will contact you through PM
Post Reply

Return to “Ideas and concepts”