thermostat with Oled display
-
- Posts: 78
- Joined: Thu Sep 24, 2020 11:02 pm
Great. Thank you very much. You are wonderful. Everything works correctly. You are my guru. I also use Termopar ESP8266 y MAX6675 .
Pytam tylko jak muszę.
-
- Posts: 78
- Joined: Thu Sep 24, 2020 11:02 pm
elmaya
In many applications, there is no need to increase the temperature by 0.5 degrees (smokehouses, stoves, saunas, etc.). Can you modify the program in such a way that the setting can be changed by 1 step or even by two with one click?
Thus, the display shows the set temperature without tenths of a degree.
Thanks whether it works or not.
greetings
In many applications, there is no need to increase the temperature by 0.5 degrees (smokehouses, stoves, saunas, etc.). Can you modify the program in such a way that the setting can be changed by 1 step or even by two with one click?
Thus, the display shows the set temperature without tenths of a degree.
Thanks whether it works or not.
greetings
Pytam tylko jak muszę.
-
- Posts: 1482
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
the code is getting a bit old.kotogi wrote: ↑Tue May 04, 2021 3:57 pm elmaya
In many applications, there is no need to increase the temperature by 0.5 degrees (smokehouses, stoves, saunas, etc.). Can you modify the program in such a way that the setting can be changed by 1 step or even by two with one click?
Thus, the display shows the set temperature without tenths of a degree.
Thanks whether it works or not.
greetings
I am considering updating the code to the current Supla library.
but I have to find time to do it.
I am considering adding the possibility of defining the steps of +/- thermostat temperature to WiFiConfig, from "0.1ºc" to "10ºc"
MAX6675 and MAX31655 probably only in the version without Oled due to lack of Gpio to connect.
-
- Posts: 78
- Joined: Thu Sep 24, 2020 11:02 pm
I wanted to write that I use your software from the Termopar ESP8266 y MAX6675 https://es-forum.supla.org/viewtopic.php?f=70&t=5950
"I am considering adding the possibility of defining the steps of +/- thermostat temperature to WiFiConfig, from "0.1ºc" to "10ºc""
SUPER
Pytam tylko jak muszę.
-
- Posts: 8356
- Joined: Thu Jun 27, 2019 12:16 pm
- Location: Wrocław
@elmaya, please consider that support for "thermostat" channel type should be introduced within few months (hopefully). So personally I'd rather hold with rewriting thermostat applications before that.
Widzimy się na Supla Offline Party vol. 2
-
- Posts: 1482
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
I am aware that someday there will be a thermostat channel.
but there will be at least a thermocoupler version "probably without Oled" as a workaround to avoid having to use Supla scripts as a thermostat.
-
- Posts: 8356
- Joined: Thu Jun 27, 2019 12:16 pm
- Location: Wrocław
I expect that someday will happen within few months.
Widzimy się na Supla Offline Party vol. 2
-
- Posts: 1482
- Joined: Wed Jun 27, 2018 5:48 pm
- Location: El Saucejo - Sevilla
the "someday" was meant to be a joke.