Potwierdzam - ten człowiek - elmaya jest NIESAMOWITY.mechatronikaPL wrote: ↑Tue Jul 14, 2020 7:03 am elamya You are amazing ! Been working great since yesterday Thank You very much !!!
thermostat with Oled display
-
- Posts: 6
- Joined: Sat Nov 02, 2019 3:50 pm
Witam
czy rozwijałeś ten pomysł aby przekaźniki na kolejnym wemosem zainstalować w innym pomieszczeniu ??
szukam wsparcia przy realizacji sterowania ogrzewaniem
Hi Elmaya,
I have question - i want to connect buzzer instead relay.
It wants an alarm to go off if the temperature is too low or too high.
Is it possible on your thermostat ?
I have question - i want to connect buzzer instead relay.
It wants an alarm to go off if the temperature is too low or too high.
Is it possible on your thermostat ?
Prawdopodobienstwo jest zerowe że wygrasz miliona jak nie wyślesz kuponu totolotka...
-
- Posts: 6
- Joined: Sat Nov 02, 2019 3:50 pm
I'm going to make a working thermostat as well but in other way (glass front panel) but I stucked on projecting pcb working on progress ...It is true that I abandoned construction, otherwise I had solved it at home, but it was close to implementation
How is Your project? Is working properly? I'm curious
YoMan
________________________________________
Wziąłem udział w Supla Offline Party 2023
________________________________________
Wziąłem udział w Supla Offline Party 2023
Hi @elmaya
Great respect for the soft
I've got question about setting the temperature. Now it is working like seting + and - so if I want to lower the temperature for night by 1,5 grads I need to make timetable that is lowering 3x 0,5 grad. If something go bad and one order will not go through the net then the next day the tempertature will be lower/higher by 0,5C.
Is it possible to change the soft to make just order setting certain value for thermostat? For example 21 grades? Similar like it is with dimmable LED, it is possible to set % of light so I guess Supla supports states with value. Or am I tottaly wrong?
Great respect for the soft
I've got question about setting the temperature. Now it is working like seting + and - so if I want to lower the temperature for night by 1,5 grads I need to make timetable that is lowering 3x 0,5 grad. If something go bad and one order will not go through the net then the next day the tempertature will be lower/higher by 0,5C.
Is it possible to change the soft to make just order setting certain value for thermostat? For example 21 grades? Similar like it is with dimmable LED, it is possible to set % of light so I guess Supla supports states with value. Or am I tottaly wrong?
Last edited by YoMan on Sat Nov 21, 2020 9:08 pm, edited 1 time in total.
YoMan
________________________________________
Wziąłem udział w Supla Offline Party 2023
________________________________________
Wziąłem udział w Supla Offline Party 2023
-
- Posts: 53
- Joined: Thu Nov 14, 2019 2:28 pm
Hello
Elmaya, will it work on the ds 18b20 in this thermostat ?.
Sorry i don't know english ds18b20 parasitically.
Elmaya, will it work on the ds 18b20 in this thermostat ?.
Sorry i don't know english ds18b20 parasitically.
https://en-forum.supla.org/viewtopic.php?f=10&t=5320sllawek66@wp.pl wrote: ↑Sat Nov 21, 2020 8:41 pm Hello
Elmaya, will it work on the ds 18b20 in this thermostat ?.
Sorry i don't know english ds18b20 parasitically.
YoMan
________________________________________
Wziąłem udział w Supla Offline Party 2023
________________________________________
Wziąłem udział w Supla Offline Party 2023
-
- Posts: 53
- Joined: Thu Nov 14, 2019 2:28 pm
I only have two wires for the sensor, I want to power with two wires parasitically if this soft will do the trick