hardware solution:eradek wrote: ↑Fri Jan 29, 2021 9:04 am Hi Guys,
I would like to use this board to manage floor heating, 9 circuits. However I need one more functionality I need additional circuit that will close whenever one of 9 circuits is closed to steer the pump. Is it possible, are there any relay module that has like additional circuit which close whenever one main circuits is closed?
Esp8266 12 touch control relay
Thanks a lot Elmaya! What kind of diode should I use here?
In fact whenever any heating circuit is open I need to trigger two water pumps and heating pump. So I assume I can just use this additional 4 channel relay instead in same fashion - https://elty.pl/pl/p/Modul-z-4-przekazn ... rami-/2628?
In fact whenever any heating circuit is open I need to trigger two water pumps and heating pump. So I assume I can just use this additional 4 channel relay instead in same fashion - https://elty.pl/pl/p/Modul-z-4-przekazn ... rami-/2628?
the relays are okeradek wrote: ↑Fri Jan 29, 2021 4:27 pm Thanks a lot Elmaya! What kind of diode should I use here?
In fact whenever any heating circuit is open I need to trigger two water pumps and heating pump. So I assume I can just use this additional 4 channel relay instead in same fashion - https://elty.pl/pl/p/Modul-z-4-przekazn ... rami-/2628?
diodes: 1N4148, 1N4001-1N4007
Again I need your help. I am having trouble connecting to supla server. First MPR121 was not found, so I changed the code as mentioned in the thread. Now it starts, connects to WIFI but is not connecting to Supla server. Also looks like there is a problem to mount FS not sure what's the reason for that. Below is serial output:
Code: Select all
mounting FS...
failed to mount FS
No Double Reset Detected
Server status:
5
Unknown server address
Recover.0 read.0 channel 0
Recover.1 read.0 channel 1
Recover.2 read.0 channel 2
Recover.3 read.0 channel 3
Recover.4 read.0 channel 4
Recover.5 read.0 channel 5
Recover.6 read.0 channel 6
Recover.7 read.0 channel 7
Recover.8 read.0 channel 8
Recover.9 read.0 channel 9
Recover.10 read.0 channel 10
Recover.11 read.0 channel 11
CONNECTING WIFI
CONNECTED
local IP: 192.168.1.14
subnetMask: 255.255.255.128
gatewayIP: 192.168.1.1
Signal Strength (RSSI): -71 dBm