The problem with eps07 is resolved. the designed tile is functional and responds to touch. I am still waiting for the CJMCU2317 relay control system and I am assembling the equipment.
Could @elmaya colleague support DS18 on GPIO2? I will come and thank you for the nice project
.
Esp8266 12 touch control relay
Almost complex. Of course it works - a movie from the test. I am still waiting for the 23017 chip and it folded together with the buttons. I will definitely present
https://www.youtube.com/watch?v=HhSvnoFE0nc
https://www.youtube.com/watch?v=HhSvnoFE0nc
jak coś nie działa to włącz zasilanie.....
-
- Posts: 2
- Joined: Sun Sep 06, 2020 7:17 pm
Hello, this is my first post here. I have a problem to compile code from the first post.
My logs:
My logs:
supla:590:1: error: 'SuplaDeviceCallbacks' does not name a type
C:\Users\Paweł\Desktop\supla\supla.ino: In function 'void setup()':
supla:444:15: error: 'class SuplaDeviceClass' has no member named 'setDigitalReadFuncImpl'
supla:445:15: error: 'class SuplaDeviceClass' has no member named 'setDigitalWriteFuncImpl'
supla:455:34: error: invalid conversion from 'uint8_t* {aka unsigned char*}' to 'const char*' [-fpermissive]
In file included from C:\Users\Paweł\Desktop\supla\supla.ino:4:0:
C:\Users\Pawe�\Documents\Arduino\libraries\SuplaDevice\src/SuplaDevice.h:207:8: error: initializing argument 2 of 'bool SuplaDeviceClass::begin(char*, const char*, const char*, char*, unsigned char)' [-fpermissive]
bool begin(char GUID[SUPLA_GUID_SIZE],
^
supla:455:34: error: invalid conversion from 'int' to 'char*' [-fpermissive]
In file included from C:\Users\Paweł\Desktop\supla\supla.ino:4:0:
C:\Users\Pawe�\Documents\Arduino\libraries\SuplaDevice\src/SuplaDevice.h:207:8: error: initializing argument 4 of 'bool SuplaDeviceClass::begin(char*, const char*, const char*, char*, unsigned char)' [-fpermissive]
bool begin(char GUID[SUPLA_GUID_SIZE],
^
supla:455:34: error: invalid conversion from 'char*' to 'unsigned char' [-fpermissive]
In file included from C:\Users\Paweł\Desktop\supla\supla.ino:4:0:
C:\Users\Pawe�\Documents\Arduino\libraries\SuplaDevice\src/SuplaDevice.h:207:8: error: initializing argument 5 of 'bool SuplaDeviceClass::begin(char*, const char*, const char*, char*, unsigned char)' [-fpermissive]
bool begin(char GUID[SUPLA_GUID_SIZE],
^
C:\Users\Paweł\Desktop\supla\supla.ino: At global scope:
supla:590:1: error: 'SuplaDeviceCallbacks' does not name a type
exit status 1
'SuplaDeviceCallbacks' does not name a type
It seems that you do not have the correct Supla library
https://github.com/SUPLA/arduino
and please read the first line of the code carefully.
https://github.com/SUPLA/arduino
and please read the first line of the code carefully.
Hi Guys,
I would like to use this board to manage floor heating, 9 circuits. However I need one more functionality I need additional circuit that will close whenever one of 9 circuits is closed to steer the pump. Is it possible, are there any relay module that has like additional circuit which close whenever one main circuits is closed?
I would like to use this board to manage floor heating, 9 circuits. However I need one more functionality I need additional circuit that will close whenever one of 9 circuits is closed to steer the pump. Is it possible, are there any relay module that has like additional circuit which close whenever one main circuits is closed?