directLink controlled by gestures

Post Reply
elmaya
Posts: 914
Joined: Wed Jun 27, 2018 5:48 pm
Location: Sevilla

Fri Mar 08, 2019 11:07 am

directLink controlled by gestures

0.96" Oled I2C
Paj7620 gesture sensor
4 channels (8 Link) turned on-off
move left or right select channel
upward movement sends link up 1-4
downward movement sends link down 1-4
Wifi config D3 (Gpio 0) 5 seconds
SCL = D1 (Gpio 5)
SDA = D2 (Gpio 4)

https://youtu.be/QPtxDJUXq3Q

Image

Image

edited: Link 4 up down was swapped
D_Link_x8_Gesture7620_oled_Dout_32Mbit.rar
compiled firmware
(395.41 KiB) Downloaded 78 times
Last edited by elmaya on Wed Mar 13, 2019 5:05 pm, edited 1 time in total.
edm
Posts: 155
Joined: Mon Jan 15, 2018 6:18 pm

Wed Mar 13, 2019 12:45 pm

Fantastic :)
elmaya
Posts: 914
Joined: Wed Jun 27, 2018 5:48 pm
Location: Sevilla

Wed Mar 13, 2019 2:39 pm

6 channels (12 link) turned on-off

D_Link_x12_Gesture7620_oled_DOUT_32Mbit.rar
conpiled firmware
(396.13 KiB) Downloaded 102 times
User avatar
wojtas567
Posts: 1991
Joined: Sun Apr 03, 2016 7:16 pm
Location: Olsztyn

Wed Mar 27, 2019 12:41 pm

I started this soft and I have to say that it surprised me very positively.
Basic gesture support works 100%.
I tested additional double waving, etc. (there are 15 of them) on the example code, sometimes it was able to run something else but a fairy tale :).
Pozdrawiam
Wojtek
Tanker62
Posts: 3
Joined: Wed Jan 29, 2020 3:29 pm

Wed Jan 29, 2020 5:25 pm

I was skeptical about it due to my experience with gesture-based appliances, but it was a pleasant surprise, it does work quite well. Congrats, you've come up with something better than a Kinect :lol:
Post Reply

Return to “Ideas and concepts”